BBS
BULKHEAD STAKE BODY
body shall be as specified in
When code BBS is specified, a
3.5.3 through 3.5.3.6 for the
permanently attached solid front
vehicle class furnished, except
bulkhead, constructed of not less
the rear end racks shall be the
than 12 gage steel with a screen
manufacturer's standard swing
opening behind the cab window
type, hinged to each side rack.
shall be provided in lieu of front
The stake/platform body shall be
end racks.
adequately reinforced to provide
support for an evenly distributed
payload (GVW minus curb
BDF2
HEAVY DUTY FLOOR
weight and operator weight).
When BDF2 is specified, the
The body shall be mounted to a
body floor shall be diamond
hydraulic hoist unit.
Locking
tread steel, with a minimum
devices shall be provided near
thickness of 5 mm (3/16 in) and
the center of the rear racks to
additional
lateral
support
lock closed and to lock the racks
provided at the wheel wells.
to the body. All locking devices
Two-piece floors shall be spliced
shall be operable from the
longitudinally and completely
ground. A rear bumper is not
welded the full length of the
required. When a steel floor is
splice. One completely welded
furnished on dump stakes, it
lateral steel floor splice is
shall have a smooth finish.
acceptable on bodies over 4880
The body shall be mounted to
mm (16 feet) in length.
the hoist unit in accordance with
BDF3
APITONG FLOOR
the
hoist
manufacturer's
When code BDF3 is specified,
recommendations and shall be
apitong wood floors shall be
reinforced, for added strength
provided for the body.
when necessary, for hoist
operations. Rear body mounting
BDF4
FLOORING-BED-RECYCLED
shall include hinges securely
MATERIAL
welded to the body longitudinal
When option code BDF4 is
sills, a connecting cross shaft,
specified, recycled tire and plastic
and a plate securely bolted to
plank boards, Rumber Materials
the chassis main frame rails.
Inc. or equal, shall be furnished.
A hydraulic conversion type
Plank boards shall be a minimum
hoist shall be furnished. Unless
of 1½ in. tongue and grove
otherwise specified (see 6.2),
secured to bed frame with
the conversion hoist shall have a
minimum ¼ in. stainless steel self
minimum lifting capacity rating of
tapping countersunk screws. The
Class D hoist for Class C
installation procedures and plank
vehicles, Class E hoist for Class
width shall be in accordance with
D vehicles and Class F hoist for
the
manufacturer's
Class F vehicles. Conversion
recommendation.
hoist ratings shall be in
accordance with the National
BDS
DUMP STAKE BODY
Truck Equipment Association
When code BDS is specified, a
Conversion Hoist Chart. The
dump stake/platform body shall
hoist shall be a double-acting
be provided. The stake/platform
scissors or under body type with
Federal Standard 807M
Page 31 of 65
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business