PINTLE HOOK, AIR CUSHIONED
ATT
RIGID TYPE
ASI
AIR CLEANER SERVICE
When code ATT is specified, a
INDICATOR (DASH MOUNTED)
rigid type pintle hook with air
When code ASI is specified, a
operated plunger cushion shall be
re-settable
dash
mounted
installed on the chassis frame
service indicator or warning light
with reinforcements to transfer a
that registers the highest air
vertical tongue load of not less
restriction reading shall be
than 3175 kg (7000 lb) and a
furnished.
horizontal drawbar load of not
less than 31750 kg (70000 lb)
ATC
TRACTION CONTROL-
directly to the chassis rails. Code
AUTOMATIC
ATT is not available when code
When code ATC is specified,
HTG, HTGU, or HTGX is
automatic
traction
control
specified.
through the ABS system shall be
supplied.
ATR
AIR TRANSPORTABLE-C-130, C-
AUXL
AUXILIARY LIGHTS
141,C-5, & C-17 AIRCRAFT
When code AUXL is specified,
When code ATR is specified, air
two auxiliary lights shall be
transportability
requirements
provided.
Lights shall be
shall include air transport
mounted at the top corners of
certification in C-130, C-141, C-
the cab protection rack and shall
5,
and
C-17
aircraft
in
not protrude above the rack.
accordance with the guidelines
Wiring shall be protected. The
in MIL-HDBK-1791. In addition,
switch to operate the lights shall
all vehicles must be equipped
be located in the cab and shall
with military standard tie down
be easily accessible to the
provisions as specified in MIL-
seated driver. The lights shall
STD-209 and option code TDN.
be PAR 36 sealed beams
See 4.4
Number 4411-1, 35 watts and
shall be mounted in waterproof,
ATR2
AIR TRANSPORTABLE-C-5 &
adjustable, rubber automotive
C17 AIRCRAFT ONLY
housings.
Lights shall be
When code ATR2 is specified,
capable of illuminating the entire
air transportability requirements
frame to the rear of the cab
shall include air transport
protection rack.
certification in C-5 and C-17
aircraft (not C130 or C141) in
B16
16 FT. BODY
accordance with the guidelines
in MIL-HDBK-1791. In addition,
B18
18 FT. BODY
all vehicles must be equipped
with military standard tie down
provisions as specified in MIL-
B20
20 FT. BODY
STD-209 and option code TDN.
See 4.4
B22
22 FT. BODY
Federal Standard 807M
Page 30 of 65
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business