less than 78 In. nor more than
position there shall be not less
81 In. shall be provided.
that 760 mm (30 inches),
measured in a horizontal plane,
CLN
CAB, LONG NOSE STYLE
between the front of the rear
seat back and the rear of the
When code CLN is specified, a
front seat back. A kick-space
conventional long length nose
height of not less than 70 mm
cab with BBC of 116 to 124
(2.75
inches)
shall
be
inches shall be provided
maintained between the floor
and the rear of the front seat in
COE
TILT CAB
all positions of adjustment.
When code COE is specified, a
Legroom and space forward of
cab-over-engine (tilt cab) shall
the front seat shall be equivalent
be provided.
Provisions to
to that provided ahead of the
facilitate cleaning the windshield
seat in a two-door standard cab.
shall be provided by means of a
Three pairs of seat belts shall be
bumper step, or bumper step
installed for both the front and
cutouts, and a grab handle
rear seats. Front outboard seats
located under the windshield.
shall have combination pelvic
and upper torso restraint seat
CPR
CAB PROTECTION RACK
belts.
Cab doors shall be
When code CPR is specified, a
equipped with locks operable
cab protection rack shall be
from inside the cab through
provided.
The cab protector
mechanical linkages, with both
rack shall be mounted behind
front doors equipped with an
the cab and shall be the full
external key operated lock. Cab
width (+2/-3 inches) of the
doors shall have windows with
regular non-sleeper cab. Cab
crank
operated
window
protector rack shall be the same
regulators. A rear window shall
height (+5/-5 inches) as the
be provided.
Interior lighting
regular non sleeper cab. The
shall be provided. Safety grips
cab protector rack for sleeper
or grab handles shall be
cabs shall be a minimum of 86
provided at each door of the cab
inches wide X 75 inches high.
to assist personnel climbing into
The cab protector rack shall
the cab. The cab roof shall be
permit driver visibility of the
of one-piece construction; or, if
vehicle rear frame area through
welded, the roof shall give the
the rear window; when a rear
appearance of one piece, with
window is furnished. The cab
weld seams being continuous,
protector rack shall conform to
waterproof, and free of visible
Federal Motor Carrier Safety
bumps or protrusions.
Full-
Regulation 393.106.
length drip moldings shall be
mounted above the doors.
CPR1
CAB PROTECTION RACK, PLUS
When code CPR1 is specified, a
CE
CAB, EXTENDED STYLE
cab protection rack meeting the
When code CE is specified a
requirements for code CPR and
chassis OEM extended cab
furnished with a locking chain
having an inside length (from
rack, and full width locking tool
firewall to back of cab) of not
tray (minimum 10 inches high
Federal Standard 807M
Page 33 of 65
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business