MIL-S-62549(AT)
3.2.3.1 Frame reliability. The frame reliability shall have a design requirement of 150,000 mi average frame life which may be demonstrated by analytical calculations.
3.2.4 Maintainability. The total maintenance time, excluding driver and crew checks and services shall not exceed 8 manhours during 6,000 mi of specified operation. This equates to a maintenance ratio (MR) of 0.04 at 30 mi of operation equivalent to one hr of operation. The scheduled maintenance interval shall be six months or 6,000 mi. Any of these conditions that cannot be corrected by the crew in one hr using BII is considered to be a failure. Maintenance and human induced failures are excluded.
3.3 Materials. Material used in the manufacture of the vehicle shall be new and of highest commercial quality as normally used for this type of equipment, considering strength, durability, ductility, best engineering practice and the purpose for which the equipment is to be used; and shall be as specified, where applicable.
3.3.1 Recycled, virgin, and reclaimed materials. There are no requirements for the exclusive use of virgin materials. The use of recycled or reclaimed (recovered) materials is acceptable provided that all other requirements of this specification are met (see 6.3.1).
3.3.2 Dissimilar metals. Dissimilar metals shall be electrically insulated from one another to minimize or prevent galvanic corrosion.
3.4 Design and construction. The semitrailer, lowbed shall be a tactical support mobility vehicle with a payload rated at 80,000 lb capacity and shall have a folding gooseneck which shall be operated by a winch and cable from the truck-tractor. The operation of the gooseneck will be designed to permit one-man operation for loading and unloading various types of construction equipment. The semitrailer shall not exceed the Passe-Partout International (PPI) clearance dimensions specified in figure 1.
3.4.1 Weights and dimensions. The semitrailer, without payload, resting on level ground and with the platform level, shall conform to the weights and dimensions specified below:
a. Payload rating 40 ton
b. |
Maximum overall width, |
120 in |
with outriggers |
||
c. |
Maximum reducible width, |
96 in |
with outriggers folded |
||
d. |
Minimum length of center bed (Load) |
18 ft |
e. |
Maximum height of deck (Load bed) |
40 in |
f. |
Minimum ground clearance (Load bed) |
12 in |
g. |
Maximum curb weight |
19,500 lb |
7
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business