MIL-S-62469(AT)
3.4.2.2 Lights. Lights specified on applicable drawings shall be capable of operating throughout all trailer operating conditions (see 4.8.4).
3.4.3 Welding. Metal-arc welding of structural steels and the procedures required for documentation prior to production welding shall be in accordance with MIL-STD-1261. The contractor shall have an accepted welding procedure and accepted workmanship samples in accordance with MIL-STD-1261 for each type of weld before any production welding can be accomplished (see 4.8.5).
3.4.3.1 Welder and welding operator certification. Before assigning any welder to manual welding work, the contractor shall provide the contracting officer with certification that the welder has passed qualification codes for the type of welding operations to be performed and that such qualification is effective as defined by the particular code:
a. AWS D1.1, Structural Welding Code, Section 5, qualification.
b. ASME Boiler and Pressure Vessel Code, Section 9, Welding and Brazing
Qualifications
If only flat or horizontal welds are required, the contractor need not, qualify welders for "all position welding". Subject to approval by the Government, the contractor standard welder qualification may be substituted in lieu of the above codes provided the contractor procedure is,
as a minimum, equivalent to the above codes. The contractor shall be responsible for determining that automatic welding equipment operators are capable of producing quality welds in accordance with the contractor or manufacturer welding procedures (see 4.8.5).
3.4.3.2 Welding repairs and burning operations. Welding repairs and burning operations of any type or class shall be made only when and to the extent specifically authorized by the acquisitioning activity (see 4.8.5 and 6.2).
3.4.4 Lifting attachments. Trailers shall be provided with lifting attachments in accordance with applicable drawings. The lifting attachments shall be structurally adequate to lift the trailer when loaded with maximum payload (see table III). Lifting slings, with spreader bar, shall conform to MIL-STD-209 (see 4.8.6).
3.4.5 Tires. In accordance with Drawing 8750023, tube type, 12 ply, 11.00 - 20 tires shall be furnished conforming to class CC, style a of MIL-T-12459. When mounted on the trailer, the
tires shall be inflated to 75 psi (see 4.8.7).
3.4.6 Landing gear. Landing legs shall support the fully loaded trailer and withstand the strains imposed when coupling and uncoupling the trailer from the towing vehicle and raising and lowering the loaded trailer. The landing gear shall operate freely when trailer is loaded or unloaded and shall operate without physical interference (see 4.8.8).
6
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business