MIL-S-62469(AT)
3.3 Materials. Materials shall be as specified herein and in referenced specifications and drawings. Material shall be free of all defects that might affect serviceability and functions of the finished product (see 4.1.2 and 6.7).
3.3.1 Qualified products. The contractor shall be responsible for using all assemblies and parts necessary in semitrailer construction that are listed as qualified products on the Qualified Products List (QPLs) and those approved for inclusion on the QPLs. Assemblies and parts determined as QPL items appear on the engineering parts list. The contractor manufacturing inspection records shall specifically list all QPL items by part or drawing number, name of supplier, and number and date of the QPL. When assemblies and parts are approved as qualified products but not yet listed on QPLs, the contractor shall list the products by number and date of the approval document with the name of supplier (see 4.1.2).
3.3.2 Fungus resistant product. Materials required to resist fungus shall meet the requirement of MIL-STD-454, Requirement 4 (see 4.1.2).
3.3.3 Flammable materials. Flammable materials shall not be used unless the materials are provided with suitable protection to prevent hazard (see 4.1.2).
3.3.4 Ozone resistance. When rubber components are required to be ozone resistant, the degree of resistance shall be as specified in applicable specifications or drawings (see 4.1.2).
3.4 Construction. Trailer components, subassemblies and assemblies shall be fabricated and assembled into a complete trailer in accordance with applicable drawings (see 2.1.2). Guided missile transporter M976 is manufactured from the M974 base trailer and from the conversion kit, Drawing 10252280. Large repair parts transporter M1033 is manufactured from the M974 base trailer and from the conversion kit, Drawing 11455333. All parts, assemblies, and subassemblies requiring identification shall be identified in accordance with MIL-STD-130. The fabrication and manufacture of equipment shall be executed in a manner commensurate with the intended use of the end item and accepted Government standards and specifications delineated herein.
3.4.1 Wheel bearing seals. When fording or operating in mud, sand, or snow, seals shall prevent entrance of foreign matter into bearings. Water contamination of wheel bearing lubricant after fording operations, shall be not more than 2 percent by volume. All bearing seals shall prevent leakage of lubricants from the bearings (see 4.8.2).
3.4.2 Electrical system. The trailer shall be equipped with a 24-volt electrical lighting and signaling system in accordance with applicable drawings and provide connection to a suitable towing vehicle 24 volt system (see 4.8.3).
3.4.2.1 Electrical circuits. Electrical circuits shall maintain continuity from end to end without evidence of internal or external shorts during all trailer operating conditions (see 4.8.3).
5
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business