spreader with a material hopper
manual(s) for the vehicle and
equipment shall be provided.
of not less than 3.8 cubic meters
(5 cubic yards) capacity shall be
provided. The sand and salt
PSMA
PARTS AND SERVICE MANUALS
material
feed
auger
and
AIR FORCE
spreader shall be hydraulically
When code PSMA is specified, 2
driven
by
the
snowplow
sets of parts & service manuals
hydraulic system when code
shall be sent to Warner Robins
MPS is specified. When code
Air Force Base as detailed in the
NAS is specified, the sand and
vehicle vendor's contract.
salt material feed auger and
spreader shall be hydraulically
powered by a PTO mounted
hydraulic pump or by its own
PSME
PARTS AND SERVICE MANUALS
auxiliary engine driven hydraulic
ELECTRONIC
pump. Controls shall be located
When code PSME is specified,
in the cab. Hydraulic lines shall
the parts and service manual
be
provided
with
quick
shall be furnished in electronic
disconnect hose couplers. Hose
format (CD or web-based).
caps, pump caps, cylinder caps
and hydraulic motor caps shall
PWO
POWER WINDOWS
be provided if no other
When code PWO is specified,
protection system is provided.
an OEM power windows shall be
Caps shall be secured with a
supplied.
corrosion-resistant
security
device to prevent loss. Caps
shall prevent entrance of
RACS
AM/FM RADIO WITH CASSETTE
contaminants into the hydraulic
PLAYER
system when disconnected.
When code RACS is specified,
an OEM AM/FM/clock radio with
PH
PINTLE HEIGHT 510 MM (20
integrated cassette player shall
INCHES)
be provided.
When code PH is specified, the
pintle height, measured to the
RAD
AM/FM RADIO WITH COMPACT
centerline at the pintle, shall be
DISC PLAYER
510 mm (+125 mm, - 0) (20 in
When code RAD is specified, an
[+5, -0]).
Note: option not
OEM AM/FM/clock radio with
available when code HTG,
integrated compact disc player
HTGU, or HTGX is specified.
shall be provided.
PL
POWER LOCKS
RM3
MOTORIZED RIGHT SIZE
When code PL is specified,
MIRROR (INCLUDES RM4)
OEM power door locks shall be
When code RM3 is specified,
supplied on all cab doors.
the curbside flat mirror shall be
of the motorized type, with
remote control.
The mirror
motor shall provide not less than
PSM
PARTS AND SERVICE MANUALS
60 degrees horizontal rotational
When code PSM is specified, a
viewing range. Code RM3 shall
parts list, or book, all shop repair
Federal Standard 807M
Page 47 of 65
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business