MIL-PRF-46756E(AT)
3.6 Cleaning, treatment, and painting. Unless otherwise specified (see 6.2), all cleaning,
treatment, and painting shall be in accordance with the manufacturer's standard practice. Color
required shall match color chips of FED-STD-595.
3.7 Marking. Vehicle marking shall be in accordance with MIL-STD-642.
3.8 Data plates. All data plates shall be in accordance with the manufacturer's standard
practice.
3.9 Workmanship. The workmanship displayed in the fabrication and assembly of the
semitrailers shall be such as to meet the performance under all applicable environmental
conditions. The quality of workmanship shall assure delivery of semitrailers, which are free from
defects, improper manufacturing or assembly practices, and which meet or exceed requirements
specified herein. Defective components or parts and assemblies, which have been repaired or
modified to overcome deficiencies, shall not be furnished. Painted surfaces shall be free from sags
or runs.
3.10 Air transportability. If specified, the design for air transportability shall conform to
MIL-STD-1791.
4. VERIFICATION
4.1 Classification of inspections. The inspection requirements specified herein are
classified as follows:
a. First article inspection (see 4.2).
b. Conformance inspections (see 4.3).
4.2 First article inspection. Unless otherwise specified (see 6.2), first article inspection
shall be performed on the first production semitrailer and on two additional semitrailers at the
initial production. This inspection shall include the examinations of 4.4 and the tests of 4.5.
4.2.1 First production vehicle inspection. The first completed production vehicle shall be
subject to provisional inspection by the Government, after a complete inspection by the contractor
which includes road test in accordance with 4.2. 1. 1.
4.2.1.1 Fifty mile test. The semitrailer shall be loaded with highway payload or with a
simulated load of equal weight and operated for a distance of not less than 50 miles. Test course
selected by the manufacturer shall be on smooth, approximately level, hard-surfaced roads.
9
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business