MIL-PRF-46756E(AT)
TABLE III. Classification of defects - Continued.
Method of
Category
Defect
examination
203
Electrical system components; improper installation or
Visual
assembly (see 3.4.2.2).
204
Landing gear; improper assembly or installation
Visual
(see 3.4.10).
4.4.1 Unclassified defects. All component defects having no bearing on function, safety,
interchangeability, or life, but which are considered departures from good workmanship, will be
noted in writing. Workmanship deficiencies falling within this category and recurring in five
consecutive lots, or in two lots or more within a thirty-day period, will be added to the minor
classification.
4.4.1.1 Recurring major deficiencies. A major deficiency (see 6.4) is recurring when the
same defect occurs more than once in the same sample or when the defect occurs in two
successive samples. A major defect may be considered recurring when the historical inspection
records ("P" chart or equivalent) reflect such a condition. Recurring major deficiencies shall be
cause for the entire lot or lots to be inspected for the recurring deficiencies. The deficiencies shall
be corrected when found.
4.4.1.2 Recurring minor deficiencies. A minor deficiency (see 6.4) is recurring if it occurs
more than twice in the same sample or when the defect occurs in four successive samples.
Recurring minor deficiencies shall be cause for the entire lot or lots to be inspected for the
recurring deficiencies. Correction of all deficiencies shall be accomplished prior to acceptance.
4.5 Acceptance tests. Each semitrailer shall be operated for a distance of not less than
five miles by the contractor. Semitrailers shall be completely assembled and serviced. Acceptance
test shall include all acceptance tests specified at the place of manufacture and indicated in
table IV. Performance of semitrailers shall be demonstrated on smooth, relatively level, hard-
surfaced roads and shall meet all requirements specified herein. After completion of the five mile
road test, doors shall be opened and closed to assure proper operation, fit, alignment, and action
of control devices.
12
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business