MIL-S-45152H
(c) Condition of the equipment at the start of test
(d) Tire inflation pressure
(e) Types of lubricants used
(f) Description of test instrumentation and recording apparatus, including calibration records
(g) Description of the truck tractor used
(h) Load condition of the equipment
(i) Average and maximum speeds
(j) Miles traveled, including total test mileage and accumulated mileage, and the time of
each major incident such as component failure or adjustment
(k) Component failure analysis and corrective measures
(l) Component adjustment, and method and ease of adjustment
(m) Any noted safety hazards
(n) Condition of the equipment at the conclusion of the test.
* 4.3.3.5 Reliability and maintainability report. A report pertaining to reliability and maintainability shall be furnished after completion of the extended road test. The report shall contain the following information:
(a) All failures, maintenance, and other events shall be recorded and identified by accumulated operating time, miles, cycles, or position in the test procedure as appropriate. Test conditions during the failures or irregular operations identified shall be recorded.
(b) Description of the engineering reasoning, and of any tests conducted to determine assignable causes for all failures or irregular operations identified.
(c) Description of the engineering reasoning behind any proposed corrections to be made on the production items, and the predicted effectiveness of those corrections.
(d) Test activity or contractor comments on item, features or requirements that, if modified, should improve the item.
(e) Estimates (within 5 percent of actual experienced) of manhours required for each maintenance and servicing action during the test. A brief description of the
qualifications and experience of the personnel involved shall be included and shall be adequate to allow comparison to the personnel anticipated in similar field work.
* 4.3.4 Turning and tracking tests. During the road test, conformance to turning and tracking requirements (see 3.3.1 and 3.3.3) shall be verified.
* 4.3.5 Landing gear test. Periodically during the road test, functions of the landing gear shall be tested to verify conformance to 3.13.
4.3.6 Brake tests. Brake tests to determine conformance to 3.3.2 shall be conducted during the road test. The brake tests shall be conducted with the fully loaded semitrailer coupled to a truck tractor. The truck tractor shall have a gross vehicle weight rating (GVWR) and gross combination weight rating (GCWR) not exceeding that specified in table VIII, and shall be
30
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business