MIL-S-45152H
3.2 General design.
3.2.1 Federal Motor Vehicle Safety Standards. The vehicle shall comply with all Federal Motor Vehicle Safety Standards applicable to the type of semitrailer furnished and in effect on the date of manufacture.
* 3.2.2 Dissimilar metals. All dissimilar metals used throughout the vehicle shall be insulated from one another to prevent galvanic or electrolytic action.
* 3.2.3 Ratings. Vehicle ratings shall be the manufacturer's published ratings. Component and vehicular ratings shall not be raised to meet the requirements of this specification. When published ratings are not available, verification of ratings shall be available to the appropriate engineering office of the procuring activity.
* 3.2.4 Accessibility. The design of the vehicle and optional equipment shall permit access for routine servicing and shall permit access for replacement and adjustment of component parts and accessories with minimal disturbance of other components and systems.
* 3.2.5 Asbestos. Asbestos materials shall not be used in any form in any part of the vehicle.
* 3.3 Performance. The fully equipped semitrailer shall evidence no part failure, deformation, permanent set or interference between parts when towed under each of the conditions specified
in table II. The semitrailer also shall show no part failure, deformation, permanent set or
interference between parts when towed on 15 percent side slopes, at speeds up to 10 mph, when loaded as specified in 3.4 and when empty.
TABLE II. Performance.
*
8
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business