MIL-S-45152H
* 3.5 Dimensions and clearances. The semitrailer, without payload, uncoupled from the towing vehicle, resting on its landing legs on level ground, and with the platform level, shall conform to the dimensions specified in table IV and the following:
(a) Length of usable loadspace, feet (minimum) (NOTE: SEE 3.5.1) For type I and II • • • • • • • • • • • • • • • • • • • • 16
For type V • • • • • • • • • • • • • • • • • • • • • • • 25 or 40,
as specified
(see 6.2)
(b) Upper fifth wheel height, from the ground to the underside of the upper fifth wheel plate, inches, plus or minus 1 inch
For size 15, 20, and 25 • • • • • • • • • • • • • • • • 48
For size 35 • • • • • • • • • • • • • • • • • • • • • • 52
* For size 50 and 60 • • • • • • • • • • • • • • • • • • 56
* For size 75 • • • • • • • • • • • • • • • • • • • • • • 58
(c) Distance from front of semitrailer to vertical centerline of kingpin, inches, plus or minus 2 inches
For type I and II• • • • • • • • • • • • • • • • • • • • 18
For type V• • • • • • • • • • • • • • • • • • • • • • • 22
(d) Turning clearance, from the centerline of kingpin to any portion of semitrailer 6 inches or more below upper fifth wheel plate, inches
(minimum) • • • • • • • • • • • • • • • • • • • • • • • 82
(e) Forward swing clearance, from center of kingpin to most distant point on semitrailer nose, inches (maximum)
10
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business