MIL-DTL-62073H(AT)
TABLE V. Classifications of defects - Continued.
Method of
Category
Defect
Inspection
Frame and sheet metal improper assembly, improper installation
206
Visual
(see 3.2)
Reflectors missing, improper installations, improper reflectors
207
Visual
(see 3.2)
Brake system improper assembly, improper installation, improper
208
Visual
clearances (see 3.2)
Lube fittings missing, improper installation, improper operation
209
Visual and
(see 3.2)
Functional
Rustproofing missing, improper application (see 3.2.1.3)
210
Visual
Markings and identification missing, improper size, improper
211
Visual
installation (see 3.3)
Paint improper color, improper application (see 3.4)
212
Visual
Seals leaking, defective, damaged (see 3.5.1)
213
Visual
Electrical system improper coding, improper protection, improper
214
Visual
assembly, improper installation (see 3.5.2)
Adjustment mechanism improper installation, damaged (see 3.5.4)
215
Visual and
Functional
Tiedowns, lashings, and lifts missing, improper installation,
216
Visual
improper welds (see 3.5.6)
Lubrication missing, improper grade, improper installation
217
Visual
(see 3.6.1)
Hydraulic fluid missing, improper grade, improper installation
218
Visual
(see 3.6.1)
SIE = STANDARD INSPECTION EQUIPMENT
4.4 Control tests. When control testing is required (see 6.2), control tests for
maintaining control of manufacturing operations shall be conducted as specified below.
4.4.1
Road tests.
4.4.2.1 Five-mile road test. When specified herein, the trailer shall be assembled and
serviced with the lubricants and fluids of table II and shall be connected to the prime mover and
towed for a distance of not less than 5 miles without payload over smooth, hard-surfaced roads.
4.4.1.2 Fifty- mile road test. When specified herein, the trailer shall be loaded with
full or simulated payload and towed for a distance of not less than 50 miles (80 km). The test
course shall be a smooth, hard-surfaced road.
4.5 Comparison tests. When comparison tests are required (see 6.2), the Government
may randomly select vehicles at any time during the production contract period and subject these
vehicles to the comparison tests specified in table IV. Tests will be conducted by the
16
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business