MIL-DTL-62049G
3.6.10.2 Side slopes. The semitrailer shall follow the towing vehicle without slipping or
upsetting. The semitrailer shall be operated, alternately to the left and to the right, on side slopes
having a 20 percent grade, at 20 miles per hour (mph) (see 4.5.11.2).
3.7 Electromagnetic compatibility (M313, M447, M447C, and M750 models, only).
When specified (see 6.2), the semitrailers shall conform to the electromagnetic compatibility
requirements CE102, CS 101, CS 114, RE 102 and RS 103 of MIL-STD-461 for ground
equipment (see 4.5.12).
3.8 Painting (see 4.5.2 and 4.5.16).
3.8.1 Exterior and interior surfaces. All semitrailer exterior and interior surfaces shall be
cleaned, treated, primed and painted with finish coat (aliphatic polyurethane paint) as specified
in the contract (see 6.2 and 6.7). Painting and marking shall be as specified in the contract
(see 6.2).
3.8.2 M313 model semitrailer interior finish. Light green, semigloss enamel matching
color chip No. 24533 of FED-STD-595 shall be applied on walls, doors, fittings, and mounted
equipment, except fire extinguishers and their brackets. Gray, semigloss enamel matching color
chip No. 26152 of FED-STD-595 shall be applied on the folding floor and floor proper.
3.8.3 M447 and M750 models semitrailer interior finish. Light green, semigloss enamel
matching color chip No. 24533 of FED-STD-595 shall be applied on the ceiling and upper
interior walls. Gray semigloss enamel matching color chip No. 26132 of FED-STD-595 shall be
applied on the floor, on the M750 model stowage bins (as applicable), and on the lower interior
walls.
3.9 Marking. Marking of the semitrailer shall be in accordance with MIL-STD-642. As
a minimum, marking shall include the semitrailer model number, the manufacturer s
identification, and the part or identifying number (PIN) (see 1.3 and 6.2). Marking of component
parts shall be permanent and legible (see 4.5.2 and 4.5.15).
3.9.1 Interior marking. Interior marking color shall be white.
3.10 Name, shipping, and service data plates. Unless otherwise specified (see 6.2), data
plates shall be marked, with information as specified on the applicable data plate drawings
(see 4.5.2 and 4.5.14).
3.11 Safety. The semitrailer shall comply with all requirements of Federal Motor Carrier
Safety Regulations (FMCSR) and Federal Motor Vehicle Safety Standards (FMVSS) applicable
to this vehicle at the time of manufacture. All exposed parts which are energized electrically
shall be located, insulated, and fully enclosed or guarded so as to prevent hazards to operation or
maintenance personnel, and equipment functioning. All moving parts which are of such nature
or so located as to be a hazard to operation or maintenance personnel shall be enclosed or
guarded. Protective devices shall not impair operating functions (see 4.5.17).
10
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business