or detract from appearance.
routed wiring or harnesses, and
electrical connections.
B. All bodies, systems, equipment and
7. ... Improperly
supported
or
interfaces with the chassis shall be
done in accordance with the OEM's
secured
hoses,
wiring
harnesses, mechanical controls
Body Builders Book.
Whenever
etc., including interference with
dissimilar metals are used they shall
other components.
be insulated against corrosive action.
8. ... Interference
of
chassis
C. All components will be new.
components, body parts, doors
Defective components shall not be
etc.
furnished.
Parts, equipment and
assemblies which have been repaired
9. ... Leaks of any gas, vacuum, or
or modified to overcome deficiencies
fluid lines (air conditioning,
shall not be furnished without the
coolant, oil, oxygen, etc.).
approval
of
the
purchaser.
10. . Noise, panel vibrations etc.
Component parts and units shall be
11. . Inappropriate or incorrect use of
manufactured to definite standard
hardware,
fasteners,
dimensions
with
proper
fits,
components, or methods of
clearances and uniformity. Welded,
construction.
bolted, and rivet construction utilized
shall be in accordance with the
12. . Incomplete or improper welding,
highest
standards
of
industry.
riveting or bolting.
General appearance of the vehicle
13. . Lack
of
uniformity
and
shall not show any evidence of poor
symmetry where applicable.
workmanship.
14. . Loose, vibrating abrading body
D. The following shall be reason for
parts,
components,
rejection:
subassemblies, hoses, wiring
1. ... Rough, sharp or unfinished
harnesses or trim.
edges, burrs, seams, corners,
15. . Improper body design or
and joints.
interface with the chassis that
2. ... Nonuniform panels. Edges that
could cause injury during
are not rounded, beveled, etc.
normal use or maintenance,
and which fail to provide access
3. ... Paint runs, sags, orange peel,
to perform routine or mandatory
"fish eyes" etc., and any other
repairs or maintenance on
imperfection or lack of complete
vehicle
electrical
and
coverage of paints or coatings.
mechanical systems.
In
4. ... Body panels or components
addition,
the
improper
that are uneven, unsealed, or
combination of options which by
contain cracks, dents or have
their
combination
and
voids.
installation
are
inherently
5. ... Misalignment of body fasteners,
incompatible with regard to
glass, viewing panels, light
function or safety.
housings, other items with large
16. . Sagging
non-form
fitting
or uneven gaps, spacing etc.
upholstery or padding, holes,
such as door, body panels and
tears, discoloration, etc.
hinged panels.
17. . Incomplete
or
incorrect
6. ... Improperly
fabricated
and
application of rustproofing.
Federal Standard 807M
Page 58 of 65
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business