identification of highest component
acceptance, records acceptable to the
on truck
Government indicating that the servicing
and adjusting required by 3.4.25 have
e) Dimensions and locations of any
been accomplished.
For civilian
significant projections on truck
agencies, GSA Form 1455 or an
f)
Curb weight of each axle
approved equivalent form shall be used.
g) Wheelbase
4.7
PRODUCT CONFORMANCE.
h) Front overhang
The products provided shall meet the
salient characteristics of this standard,
i)
Rear overhang
conform to the producer's own drawings,
j)
Articulation of rear suspension,
specifications, standards, and quality
unloaded, each axle (curb weight)
assurance practices and be the same
product offered for sale in the commercial
k) Rear axle spacing
market. The Government reserves the
l)
Axle rating, front, and comparison
right
to
require
proof
of
such
to 1 ¼ times (curb weight) load
conformance.
m) Axle rating, rear, and comparison
► 5.
PACKAGING.
to 1 ¼ times (curb weight) load
5.1
VEHICLE PROCESSING.
n) Suspension rating, front, and
The vehicle shall be processed for
comparison to 1 ¼ times (curb
shipment from the manufacturer's plant to
weight) load
the initial receiving activity, in accordance
o) Suspension rating, rear, and
with
the
manufacturer's
standard
comparison to 1 ¼ times (curb
commercial
practice.
When
direct
weight) load
consignee delivery is required, each fuel
tank shall be filled with a minimum of 10
p) If axle stops are to be removed for
gallons of fuel.
ramp
loading
on
aircraft,
► 6.
verification that the driveline
NOTES.
remains intact when cresting
6.1
INTENDED USE.
maximum ramp slope.
The vehicles covered by this specification
are intended for general use by the
4.5
FAILURE.
Government in transporting personnel or
Failure of the first production vehicle to
cargo; for use in performance of the
meet requirements of the contract shall be
maintenance and construction tasks
cause for the Government to refuse
indicated; or for the mounting of special
acceptance of all vehicles under contract
bodies or equipment.
Agencies shall
until corrective action has been taken.
specify (see 6.2) unusual operating
conditions, items and exceptions not
4.6
INSPECTION OF PRODUCTION
specified herein.
VEHICLES.
The contractor's inspection system shall
RESERVED.
6.2
as a minimum ensure that the vehicle
conforms to the physical and dimensional
6.3
PERFORMANCE PREDICTIONS.
requirements and is capable of meeting
SAE Truck Ability Prediction Procedure
performance
requirements
specified
computations and computations for low
herein. For each vehicle under contract,
speed and maximum geared speed will be
the contractor shall make available to the
required by the contract. The SAE J2188
Government, at the point of final
Federal Standard 807M
Page 63 of 65
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business