MIL-DTL-62027K
3.6 Identification and marking. Dolly set registration and marking (see 6.6) shall include
as a minimum, the part or identifying number (PIN), the contract or order number, and the
manufacturer's name or trademark (see 4.6.2 and 6.3).
3.6.1 Identification plates. Unless otherwise specified (see 6.2), identification plates shall
be in accordance with A-A-50271 (see 4.6.2).
3.6.2 Parts. Unless otherwise specified, all parts requiring identification shall be marked
in accordance with the manufacturer's standard practice and shall include as a minimum the
following (see 4.6.2 and 6.2):
a.
Military part number
b.
Federal stock number
c.
Manufacturer's identification and serial number
d.
Contract number, and
e.
Date of manufacture
3.7 Servicing and lubrication. Servicing and lubrication shall be performed using the
standard service products (see 4.6.2 and 6.4).
3.8 Workmanship. Workmanship shall be of such quality as to assure that the dolly set
and its components are free of defects that compromise, limit, or reduce the capability of the dolly
set in the performance of its intended use (see 4.6.2).
4. VERIFICATION
4.1 Classification of inspections. The inspection requirements specified herein are
classified as follows:
a. First article inspection (see 4.2).
b. Conformance inspection (CI) (see 4.3).
c. Comparison tests (see 4.4).
4.2 First article inspection. First two dolly sets produced under the contract shall be
subjected to first article inspection. Initial production inspection shall consist of examination and
tests as specified in tables II and III.
9
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business