MIL-DTL-62027K
4.6.2.5 Storage compartment. To determine conformance to 3.3.6, the storage
compartment shall be examined for location, to permit adapter kit mounting to shelter without
interference, and for accessibility of stored items. Compartment door shall be examined for proper
installation and operation.
4.6.2.6 Seals. To determine conformance to 3.3.7, after the 9656 km test and fording
operation, all bearings shall be examined for dirt contamination and lubricant leakage.
4.6.2.7 Safety. To determine conformance to 3.3.8, the dolly set shall be examined to
assure that hazards to operating and maintenance personnel have been eliminated or controlled.
Equipment which creates hazards shall be considered to be failures.
4.6.3 Eight-kilometer road test. When specified herein, the dolly sets shall be connected
to a shelter without payload and towed for a distance of not less than 8 km over relatively
smooth, hard-surfaced roads.
4.6.4 Eighty-kilometer road test. When specified herein, the dolly set shall be loaded with
full or simulated payload and towed for a distance of not less than 80 km. The test course shall be
relatively smooth, approximately level, hard-surfaced roads.
4.6.5 Performance. To determine conformance to 3.4, the dolly set shall pass the tests of
4.6.5.1 through 4.6.5.12. Prior to performance testing, the dolly set shall be equipped, serviced,
loaded, and coupled to the towing vehicle as specified herein.
4.6.5.1 Highway operation. To determine conformance to 3.4.1.1, the dolly set shall be
loaded with rated payload and towed at speeds specified in table I, over relatively level, smooth,
hard-surfaced paved roads. The dolly set shall meet the performance requirements specified.
4.6.5.2 Cross-country operation. To determine conformance to 3.4.1.2, the dolly set shall
be towed with rated payload and at the speed specified in table I over unimproved roads, or gently
rolling terrain. The dolly set shall meet the performance requirements specified.
4.6.5.3 Longitudinal inclines. To determine conformance to 3.4.2.1, the dolly set shall be
towed up and down longitudinal inclines having a 15% grade at cross-country speed and shall
meet the performance requirements specified.
4.6.5.4 Side slopes. To determine conformance to 3.4.2.2, the dolly set shall be towed
either left or right on side slopes having a 20% grade at cross-country speed, the dolly set shall
meet the performance requirements specified.
13
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business