M ......................METERS
identical to that furnished to the
MAN .................MANUAL
authorized company representatives for
MAX..................MAXIMUM
selection of vehicle models and
MFR..................MANUFACTURER'S
components, and shall be available to the
MIN ...................MINIMUM
engineering offices of the procuring
MPG .................MILES PER GALLON
activity, prior to delivery of the items. The
MSPC ...............MFR. STD. PAINT COLOR
chassis model furnished shall be not older
N/A ...................NOT APPLICABLE OR NOT
than the chassis manufacturer's current
AVAILABLE
model on the date of invitation for bids.
ABBREVIATIONS DEFINITIONS
3.1.1
SPECIAL REQUIREMENTS.
NHP..................NET HORSEPOWER
In addition to the standard vehicle and
OEM .................ORIGINAL EQUIPMENT
components specified in 3.1, the vehicle
MANUFACTURER
shall be furnished with special equipment
OO ....................ON-OFF ROAD TIRES
as specified herein.
OPT ..................OPTION, OPTIONAL
PASS ................PASSENGERS
3.1.1.1
TREATMENT AND PAINTING.
PTO ..................POWER TAKEOFF OPENING
The
vehicle
body,
including
RAD ..................RADIAL
compartments, doors, and tool boxes,
RBM .................RESISTING BENDING MOMENT
except bright finish aluminum and
SPD ..................SPEED
stainless steel, shall be treated and
STD ..................STANDARD (SPECIFICATIONS)
painted in accordance with MIL-HDBK-
V .......................V-TYPE (ENGINE)
1223.
The manufacturer's standard
W/, & W/O ........WITH, AND WITHOUT
treatment and painting for cab and
/ ........................AND
chassis is acceptable. Unless otherwise
specified, the exterior color shall be
3
REQUIREMENTS.
selected by the manufacturer from one of
3.1
STANDARD VEHICLE AND
the manufacturer's standard, nonmetallic
ACCESSORIES.
light or medium colors. When specified,
The vehicle, components, assemblies,
color selection will be made after contract
and accessories to be delivered under the
award from the standard color charts to
contract shall be standard or additional
be supplied by the manufacturer.
items, which meet or exceed the
requirements of this standard and as
3.1.1.2
DRAIN PLUGS.
described in the associated GSA PDF
Drain
plugs
installed
in
manual
Files. No removal, substitution or
transmissions, transfer case and rear
alteration of the chassis manufacturer's
axles shall be of the permanent magnet
standard or optional chassis model
type.
components shall be made except as
3.1.1.3
WOOD TREATMENT.
detailed herein. All chassis items shall be
Unless
otherwise
specified,
the
as
represented
in
the
chassis
manufacturer's standard wood treatment
manufacturer's technical data book.
is acceptable.
Soft wood shall be
Special bodies or mounted equipment
pressure
treated
with
a
wood
shall be as represented in the body and
preservative.
Hardwood need not be
equipment manufacturer's technical data.
treated. When specified, wood shall be
Capacities shall not exceed those
treated in accordance with MIL- HDBK-
published in the manufacturers' technical
1223.
data. Technical data shall be limited to
specifications and technical material,
Federal Standard 807M
Page 7 of 65
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business