TRUCKS AND TRUCK TRACTORS: Heavy Commercial 6X4 &
807
6X6, 19,500 TO 30,000 KG (43,000 TO 66,000 LBS) GVW
Federal Standard Number 807M, October 1, 2005
Superseding Federal Standard Number807L, October 1, 2004
1.
SCOPE AND CLASSIFICATION
1.3
COVERAGE OF TRUCK TYPES.
The types of vehicles covered by this
1.1
PURPOSE.
standard are listed below.
Additional
This document covers new commercially
optional equipment is available depending
produced, six wheeled, four and six wheel
on Standard Item Number.
drive (6x4 & 6x6) heavy trucks. It is
Figure 1. Types and Classes
intended
to
simplify
competitive
TYPES
NOMENCLATURE
CLASS
procurement of commercial vehicles, and
I
Chassis, truck, with cab (see 3.5.1)
BCDE
achieve
a
practical
degree
of
II
Truck, tractor, with cab (see 3.5.2)
BCDE
standardization within the federal fleet.
III
Truck, stake, with cab (see 3.5.3)
BC
IV
Truck, dump, with cab (see 3.5.4)
BCDE
1.2
APPLICATION.
This Federal Standard does not include all
1.4
CLASSIFICATION.
The vehicle(s) are divided into "Types"
the varieties of the commodity indicated
and "Classes." The vehicle types are
by the title but is intended to cover only
determined
by
the
chassis/body
those
vehicles
generally
acquired
configuration. The "Class" of vehicle(s)
competitively by the Government. This
shall be determined by the minimum
standard highlights, in concise form, types
gross vehicle weight rating (GVWR) as
of trucks with standardized components
follows:
and equipment. A selection of coded
optional
additional
systems
and
CLASS
B
C
D
E
F
equipment is included for divergent
(KG)
19,500
20,900
23,600
28,100 30,000
geographic and operational related needs.
(LBS)
43,000
46,000
52,000
62,000 66,000
Vehicles must meet the integrated
RESERVED.
requirements of the individual item and
1.5
the detailed paragraphs (see section 3).
1.6
STANDARD TRUCK AND
The requirements of the standard may be
ALTERNATE COMPONENTS.
tailored to meet unusual operating
The following Portable Document Files
conditions, to incorporate special purpose
(PDFs) are an integral part of this
equipment, and to provide for exceptions
document., and the vehicles and
not otherwise covered.
equipment listed in the PDF files are
These trucks are warranted by the
covered by and incorporated with the
contractor/supplier upon delivery as
requirements in this document.
specified in this standard.
Vehicle
Fed Std 807M, Item 824 (Type II 6X6 Tractor),
procurement must comply with the
8.01.2005.pdf
Federal
Property
Management
Regulations (FPMR) and the Federal
Fed Std 807M, Item 833A (Type III 6X6 Stake),
8.01.2005.pdf
Procurement Regulations (FPR).
Fed Std 807M, Items 612A-615 (Type I 6X4 Cab-
Chassis), 8.01.2005.pdf
Federal Standard 807M
Page 2 of 65
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business