MIL-S-62095C(AT)
* 3.1.1.5 Welders and welding. In addition to the requirements of 3.22.4, all welders employed in the fabrication of the semitrailer shall be certified, before any welding is accomplished, in accordance with MIL-STD-1595; the welding qualifications of the ASME BPVC, Section IX; or AWS B2.1 or Dl.l. The certification that the welders have passed the qualifications test shall be on file at the contractor's facility and shall be available for review by the Government.
* 3.1.1.6 Lubrication chart. An illustrated or schematic diagram type lubrication chart shall be provided on the semitrailer. The chart shall direct attention to all lubrication fittings and specify the range and grade of lubricants required for critical temperatures. The chart shall be permanently attached to the semitrailer in a readily visible location. The chart shall be inscribed
on a plate conforming to composition A (class 1 or 2) or composition C of MIL-P-514.
* 3.1.1.7 Lifting and tiedown attachments. When specified (see 6.2), the vehicle shall have lifting and tiedown attachments. Lifting and tiedown attachments shall be in accordance with class 1 and 2 or in accordance with class 3 of MIL-STD-209. Lifting and tiedown attachments shall conform to type II or type III of MIL-STD-209.
* 3.1.1.7.1 Tiedown identification. Tiedown attachments shall be identified by stenciling or other suitable marking. Tiedown markings shall clearly indicate that the attachments are intended for the tiedown of the vehicle on the carrier.
* 3.1.1.7.2 Transportation plate. Lifting and tiedown provisions shall include a transportation plate conforming to 3.1.1.8. The transportation plate shall have a diagram showing the attachments and proposed lifting slings, the capacity of each attachment, and the required length and size of each sling cable. The transportation plate shall have a silhouette of the vehicle showing the center of gravity.
* 3.1.1.8 Information plates. The transportation plate specified in 3.1.1.7.2, the sign specified in 3.2.8, the caution plate in 3.16.2.1 and the instruction plate in 3.16.5 shall conform to composition A (class 1 or 2) or composition C of MIL-P-514.
* 3.1.1.9 Pintle assembly. When specified (see 6.2), a trailer towing package shall be
furnished. The trailer towing package shall consist of a pintle, safety chain attachment devices, an electrical receptacle and associated reinforcements and wiring and shall be installed on the rear of the vehicle. The pintle shall conform to MS 51335-2. The pintle shall be installed in the chassis frame with reinforcements to transfer a vertical tongue load of not less than 815 kilograms (kg) (1,800 pounds) and a horizontal drawbar load of not less than 8150 kg (18,000 pounds) directly
6
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business