MIL-PRF-45316J
e.
Federal stock number
Manufacturer s part number
f.
g.
Date of manufacture
h.
Contract number
i.
U.S.
3.11.3 Name, shipping and service data plates. Unless otherwise specified (see 6.2), data
plates shall conform to A-A-50271 (see 4.6.1.24).
3.12 Safety. Conditions shall not exist that may create a hazard to operating or
maintenance personnel (see 4.6.1.25).
3.13 Servicing and adjusting. Prior to acceptance of trailers by the Government, the
contractor shall adjust and service each trailer for immediate operational use including the
following: adjust braking system, check electrical system, inflate tires, and completely lubricate
trailer and all running gear with grades of lubricants recommended for ambient temperature at
the delivery point (see table I) (see 4.6.1.26).
3.14 Lifting and tiedown attachments. When specified (see 6.2), the unit shall be
equipped with lifting and tiedown attachments. Lifting and tiedown attachments shall conform
to type II or type III of MIL-STD-209. A nonferrous transportation plate shall be provided and
mechanically attached to the unit. Transportation plates shall be inscribed with a diagram
showing the lifting attachments and lifting slings, the capacity of each attachment, and the
required length and size of each sling cable. A silhouette of the item furnished showing the
center of gravity shall be provided on the transportation plate. Tiedown attachments may be
identified by stenciling or other suitable marking. Tiedown marking shall clearly indicate that
the attachments are intended for the tiedown of the unit on the carrier when shipped
(see 4.6.1.27).
3.15 Air transportability. When specified (see 6.2), the unit shall meet the fixed-wing air
transport requirements in accordance with MIL-STD-1366 (see 4.6.1.27).
3.16 Workmanship. Quality of workmanship shall assure the trailer and all components
are free from defects that compromise, limit, or reduce capability. In addition to appearance,
defects listed in tables III and IV shall be considered cause for failure. Defective components,
parts, and assemblies which have been repaired or modified shall not be furnished (see 4.6.1.28).
10
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business