MIL-S-62127 Semitrailer, Compressed Gas Cylinder: Helium, CommercialThis specification covers a commercial semitrailer for storing, transporting, and charging compressed helium gas. The tandem axle semitrailer mounts 38 cylinders having a combined water capacity of not less than 340 cubic feet and a design working pressure of at least 2400 pounds per square inch gage psig. Semitrailer procured under this specification are commercial items which shall be warranted as specified in the procurement documents.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29

MIL-S-62127A(AT)

(Copies of the ASME Power Test Code may be obtained from the American Society of

Mechanical Engineers, United Engineering Center, 345 East 47th Street, New York, NY 10017.)

COMPRESSED GAS ASSOCIATION, INC. (CGA) Pamphlet S-l   Safety Relief Device Standards.

(Copies of the CGA pamphlet may be obtained from the Compressed Gas Association, Incorporated, 1235 Jefferson Davis Highway, Arlington, VA  22202.)

*          SAE, INC.

SAE Standards and Recommended Practices

J318                            -  Air Brake Gladhand Service (Control) and Emergency

(Supply) Line Couplers - Trucks, Truck-Tractors, and

Trailers (DoD adopted).

J560                            -  Seven-Conductor Electrical Connector for Truck-Trailer

Jumper Cable.

J588                            -  Turn Signal Lamps.

*                      J682                            -  Rear Wheel Splash and Stone Throw Protection

(DoD adopted).

J700                            - Fifth Wheel Kingpin, Commercial Trailers and

Semitrailers (DoD adopted).

J702                            - Brake and Electrical Connection Locations

(DoD adopted).

J1292                          -  Automobile, Truck, Truck-Tractor, Trailer and Motor

Coach Wiring.

(Application for copies should be addressed to SAE, Inc., 400 Commonwealth Drive, Warrendale, PA  15096.)

THE TIRE AND RIM ASSOCIATION, INC. Yearbook.

(Application for copies should be addressed to The Tire and Rim Association, Inc.,

3200 W. Market Street, Akron, OH  44313.)

(Industry association specifications and standards are generally available for reference from libraries.  They are also distributed among technical groups and using Federal agencies.)

*        2.3  Order of precedence.  In the event of a conflict between the text of this specification and the references cited herein, the text of this specification shall take precedence.

3